Product Description
Are you be hesitated because of high price for 1kg spool?
WE offer samples with lowest budget that you can try aewsome filaments!
ERYONE High speed Triple-Color Silk PLA IS COMING！
Why choose ERYONE for your 3D Printing Needs?
ERYONE focus on 3d printing filament research and development over 6 years! We have Much more experience of 3d printing filament so that offer best products and services.Our products cover almost all types of filament.Such as PLA filaments: PLA;PLA+;Matte PLA;Silk PLA;Ultra Silk PLA;Galaxy PLA;Rainbow PLA;Glow in the dark PLA;Carbon fiber PLA;Scented PLA;Wood PLA;Marble PLA. PETG Filaments: PETG;Galaxy PETG;Carbon fiber PETG. TPU Filaments: TPU;Rainbow TPU. ABS;ASA;Nylon etc. Of course we will keep to update and release new all the way!
Triple-Color PLA Features :
- 3 independent colors in one strand of filament
- Silky, Glossy and Gorgeous 3 color change effect on 3 sides of prints offers you stunning visual enjoyment
- High Dimensional Accuracy: 1.75mm, tolerance +/-0.03mm.
- Neatly Winding, High Quality, No bubble or dust with vacuum storage bags inside
- Compatible with most commonly used 3d printers
Technical Specification :
- Filament Diameter: 1.75mm
- Tolerance: ±0.03mm
- Printing Temperature:190°C-220°C
- Heated Bed Temperature: 60-70℃
- Printing Speed:30-100mm/s
Part I:Suggests Printing Parameters
| Parameter | Set up |
| Nozzle temperature | 190℃-220℃ |
| Bed temperature | 55-70℃ |
| Bed materia | glass, PEI, spring steel plate |
| Bottom printing temperature | 190℃-220℃ |
| Sealed printing | supports open printing, and the sealing effect is better if it is sealed |
| Printing speed | 30-100mm/s |
| Drying conditions | 55℃，8H |
Part II:Physical Properties of Materials
| Property | Testing Method | Unit | Typical Value |
| Density(g/cm³ at 21.5 ° C） | ASTM D792 (ISO 1183, GB/T 1033) | g/cm³ | 1.32 |
| Vicat Softening Temperature(° C) | ASTM D1525 (ISO 306 GB/T 1633) | ℃ | 56 |
| Heat distortion temperature(° C) | ASTM D648 1.8MPa 0.45MPa | ℃ | 53 |
| Glass transition temperature (° C) | DSC, 10 ° C/min | ℃ | 63 |
| Melt Index(g/10 min) | 220 ° C, 10kg 240 ° C, 2.16 kg | g/10min | 20.5±1.5 |
Part III:Mechanical Properties of Printed Samples
| Property | Test conditions | Test standards | unit | Typical Value |
| Tensile strength X-Y | 50mm/min | GB/T 1040.4 | MPa | 49.8 |
| Elastic modulus X-Y | 50mm/min | GB/T 1040.1-2006 | MPa | 1724.9 |
| Elongation at break X-Y | 50mm/min | GB/T 1040.4 | % | 1.7 |
| Tensile strength X-Z | 50mm/min | GB/T 1843 | MPa | 11 |
| Elastic modulus X-Z | 50mm/min | GB/T 1040.1-2006 | MPa | 1653.5 |
| Elongation at break X-Z | 50mm/min | GB/T 1040.4 | % | 1.1 |
| Bending strength | 2mm/min | GB/T 9341 | MPa | 66.7 |
| Bending modulus | 2mm/min | GB/T 9341 | MPa | 2315.5 |
| Charpy Impact strenght | 2.75J | GB/T 1043.1-2008 | kJ/m2 | 7.5 |
Warmly Note :
- If the consumables are not used for a long time, please keep them in a cool (temperature lower than 32℃) and dry environment (humidity lower than 40%) in time.
- Use a soft cloth to clean the nozzles before and after printing to avoid residual consumables from affecting the printer.
- If there is a problem of material blocking, please check whether the feeder spring is too loose to cause the filament to slip, and too tight to cause the filament to be damaged by the gear.
- The interlayer adhesion of silk consumables is weak. If the printed product is relatively thin, it will be easily torn laterally after being stressed. The hygroscopicity of silk consumables is stronger than that of standard PLA, so attention should be paid to sealing and drying.
- The Triple-Color pla cross is more obvious, the reasons as below:
- Winding, here is a small roll of consumables, and its winding is not uniform, which is also an important reason for the three-color cross.
- The more colors of the same section, the smaller the proportion of each color, so the probability of color crossing will be greater.
Summer Sale: Save 55% on Tri-Color and Dual-Color filaments! Use code 'MultiColorSale'.